When it comes to mixing concrete, a drill is an essential tool. If you plan on mixing your own concrete, then you need to invest in a good drill. While you can mix concrete by hand, it is much easier to mix concrete with a drill.
One of the many benefits of using a drill for mixing concrete is that it will speed up the process. It saves you time and energy by not having to mix it by hand. A drill is also useful for mixing a small amount of concrete. If the amount of concrete to be mixed is not a lot, then it is more efficient to use a drill.
When mixing concrete, the mixture should be put through the drill, not just around it. This will ensure all the ingredients are evenly combined.
6 Best Drills for Mixing Concrete Reviewed
- BOSCH Bosch GBM9-16 — Top Pick
- Makita DS4000 1/2 — Good Value
- DEWALT 60V MAX Cordless Drill For Concrete Mixing (DCD130B) — Premium Choice
- DEWALT 60V MAX Cordless Drill For Concrete Mixing (DCD130T1)
- Makita DS4012 Spade Handle Drill
- XtremepowerUS 1600W Handheld Electric Cement Mixer
1. BOSCH Bosch GBM9-16
- Powerful 9.0 amp motor – generates outstanding torque for mixing materials such as cement plaster and epoxy resin
BOSCH Bosch GBM9-16 is one of the best drills for mixing concrete with a 9.0 amp motor that can generate outstanding torque for mixing materials such as cement plaster and epoxy resin. The motor has a variable speed feature that provides high-torque power and high-speed drilling. The drill also has a rotatable 360-degree D-handle that allows the user to hold the drill-mixer in the best position. The drill also comes with a heavy-duty keyed chuck that supports a wide variety of drilling and mixing accessories.
BOSCH Bosch GBM9-16 also has an extra-long 8-ft. rubber cord with a three-prong ground plug that offers greater versatility on the job site.
- Powerful
- Variable speed
- Durable
- Safety features
- D handle does not lock in any position
Key Features
- Brand: BOSCH
- Voltage: 120 Volts
- Speed: 700 RPM
- Chuck Size: 5/8-Inch
- Maximum Power: 850 Watts
- Amperage: 9 Amps
2. Makita DS4000 1/2″ Spade Handle Drill
- Durable all-metal motor housing is jobsite tough yet lightweight
The Makita Impact Handle Drill features a powerful 9.0 amp motor that can run at 500 RPM, making it suitable for commercial applications. The DS4000 also features a large trigger switch for greater convenience, a 12-inch tube handle with a rubberized grip for improved ergonomics, a heavy-duty 1/2-inch industrial drill chuck for secure drill hold, and a universal D-handle that rotates 360 degrees for multi-position operation. The power of Makita DS4000 mixer drill is powerful enough to produce quality concrete mixing.
- Powerful
- Durable tool
- Perfect for heavy-duty projects
- Built-in torque limiter
- A bit heavy for some users
- A bit loud when in use
Key Features
- Brand: Makita
- Voltage: 120 Volts
- Speed: 500 RPM
- Chuck Size: 13 Millimeters
- Maximum Power: 350 Watts
- Amperage: 9 Amps
3. DEWALT 60V MAX Cordless Drill For Concrete Mixing (DCD130B)
- Mix up to 19 premixed drywall buckets (4.5 gal) on a single charge using DCB606 flexvolt battery (6Ah).**
DEWALT 60V MAX Cordless Drill is a versatile and powerful drill mixer for concrete that can help you with a variety of tasks around the house or on the job site. This drill is designed for mixing drywall mud, tile mortar, and concrete, and can also be used for drilling holes in wood, metal, and concrete.
The DEWALT 60V MAX Cordless Drill is equipped with a brushless motor that delivers up to 3000 RPM and up to 535 in-lbs of torque.
The DEWALT 60V MAX Cordless Drill also features a 3-position side handle that provides optimum position while mixing, and an integrated e-clutch system that helps to improve user control.
- More powerful than the DeWalt 20V MAX
- Cordless design is more convenient than a corded drill
- The e-clutch system helps to improve user control
- The 3-position side handle allows for optimum position while mixing
- May be difficult to control for some users
- More expensive than the DeWalt 20V MAX
Key Features
- Brand: DEWALT
- Voltage: 60 Volts
- Chuck Size: 20 Millimeters
- Maximum Power: 300 Watts
- Amperage: 6 Amps
4. DEWALT 60V MAX Cordless Drill For Concrete Mixing (DCD130T1)
- Mix up to 19 premixed drywall buckets (4.5 gal) on a single charge using DCB606 flexvolt battery (6Ah).**
DEWALT 60V MAX Cordless Drill For Concrete Mixing (DCD130T1) is a great concrete mixing drill for thinners, tile mortars, and fiber-reinforced concrete. The powerful brushless motor allows the DCD130T1 to tackle difficult drilling applications with ease. The anti-rotation e-clutch system provides added control and safety while in use. The red indicator LED illuminates when the e-clutch system is engaged, providing a visual cue to the user.
The DEWALT 60V MAX Cordless Drill For Concrete Mixing (DCD130T1) is a great addition to any tool collection.
- Powerful brushless motor
- Anti-rotation e-clutch system
- Red indicator LED
- Heavy
Key Features
- Brand: DEWALT
- Voltage: 60 Volts
- Chuck Size: 20 Millimeters
- Maximum Power: 300 Watts
- Amperage: 6 Amps
- Battery Cell Type: Lithium Ion
5. Makita DS4012 Spade Handle Drill
- Powerful 8.5 AMP Motor with Variable Speed for Improved Mixing and Drilling Performance
The Makita DS4012 Spade Handle Drill is a very powerful and solid drill. It has an 8.5 amp motor with variable speed for improved mixing and drilling performance. It has a variable speed (0 – 600 RPM) for mixing. Its drill bit for mixing concrete fits a wide variety of materials.
The Makita DS4012 Spade Handle Drill has a forward and reverse lever for operator convenience. It is a well-balanced design at only 6.2 lbs. for reduced operator fatigue. The Makita DS4012 Spade Handle Drill has a D-handle that rotates 360 degrees with 24 detent stops for multi-position operation
- Very powerful and solid
- Efficient in mixing thin-set
- Cost-effective in the long run
- Short cord
Key Features
- Brand: Makita
- Voltage: 110 Volts
- Speed: 600 RPM
- Chuck Size: 13 Millimeters
- Maximum Power: 350 Watts
- Amperage: 8,5 Amps
6. XtremepowerUS 1600W Handheld Electric Cement Mixer
- Variety Used - High and low gears features (7) speeds for tackling wide variety of materials, it can be used at home or job sites
XtremepowerUS 1600W Handheld Electric Cement Mixer is a great large concrete mixer for a variety of materials. It features 7 speeds for tackling a wide variety of materials and has a locking button for continuous operation. It also has a heat radiator on the top to improve the air environment during working and prevent dust from going inside. The comfortable handle is dual-sided and covered with a specially shaped material to offer comfort during long periods of use.
XtremepowerUS 1600W Handheld Electric Cement Mixer is also easy to operate with its steering wheel handle and compact design.
- High and low gears
- Locking device
- Heat radiators
- Comfort handle
- Easy to operate
- Variable speed dial
- Ridiculously cheap
- Short cord
- A little confusing instruction
Key Features
- Brand: Xtremepower
- Voltage: 110 Volts
- Speed: 700 RPM
- Thread Size: M14
- Maximum Power: 1600 Watts
Table comparing the characteristics of drills for mixing concrete
| Voltage | Speed | Chuck Size | Amperage | Maximum Power | |
|---|---|---|---|---|---|
| BOSCH Bosch GBM9-16 | 120 Volts | 700 RPM | 5/8-Inch | 9 Amps | 850 Watts |
| Makita DS4000 1/2" Spade Handle Drill | 120 Volts | 500 RPM | 13 Millimeters | 9 Amps | 350 Watts |
| DEWALT 60V MAX Cordless Drill (DCD130B) | 60 Volts | 600 RPM | 20 Millimeters | 6 Amps | 300 Watts |
| DEWALT 60V MAX Cordless Drill (DCD130T1) | 60 Volts | 600 RPM | 20 Millimeters | 6 Amps | 300 Watts |
| Makita DS4012 Spade Handle Drill | 110 Volts | 600 RPM | 13 Millimeters | 8,5 Amps | 350 Watts |
| XtremepowerUS 1600W | 110 Volts | 700 RPM | 13 Amps | 1600 Watts |
Drill for Mixing Concrete Buyer’s Guide
What Is a Drill for Mixing Concrete?
A drill for mixing concrete is a handheld power tool that does the job of mixing concrete much faster than doing it by hand. There are different types and sizes of concrete drills, but they all work in a similar fashion. The drill is equipped with a mixing paddle that does the actual work of stirring the concrete. The operator simply holds the drill in one hand and uses the other hand to guide the mixing paddle into the concrete.
The biggest benefit of using a drill to mix concrete is the speed at which it can be done. It is not uncommon for a concrete drill to mix a batch of concrete in just a few minutes. This is a huge time saver compared to doing it by hand, which can take upwards of an hour. Another benefit is that it is much less strenuous for the operator. Mixing concrete by hand can be very tiring, but with a drill, it is a relatively easy task.
How to Pick a Drill for Mixing Concrete?
A drill for mixing concrete needs to be able to handle the rigors of mixing concrete. It should be able to mix the concrete evenly and quickly, without leaving any clumps or uneven patches. It should also be easy to clean afterward. Here are some things to consider when choosing a drill for mixing concrete:
Size
Mixing concrete is a tough job, so you’ll need a drill that is up to the task. A drill that is too small will struggle to mix the concrete evenly, while a drill that is too large will be difficult to control. Choose a drill that is the right size for the job.
Power
Mixing concrete requires a lot of power, so you’ll need a drill that is up to the task. A drill that is too weak will struggle to mix the concrete evenly, while a drill that is too powerful will be difficult to control. Choose a drill that has the right amount of power for the job.
Speed
Mixing concrete requires a drill that can mix the concrete quickly and evenly. A drill that is too slow will leave clumps and uneven patches, while a drill that is too fast will be difficult to control. Choose a drill that has the right speed for the job.
Type of Drill
There are two main types of drills for mixing concrete: impact drills and rotary drills. Impact drills are better for breaking up concrete, while rotary drills are better for mixing concrete. Choose the type of drill that is right for the job.
Brand
There are many different brands of drills on the market, so it’s important to choose one that is reputable and has a good warranty. Choose a drill that is from a reputable brand and that comes with a good warranty.
Drill for Mixing Concrete FAQ
What Kind of Drill Do You Use to Mix Concrete?
A concrete mixing drill attachment is ideal for mixing concrete. Be sure to wear appropriate safety gear, including a dust mask, when using the drill.
Can You Use a Hammer Drill to Mix Concrete?
A hammer drill can be used to mix concrete, but it is not the best tool for the job. A better option would be to use a concrete mixer.
Is It Cheaper to Mix Your Own Concrete?
It is cheaper to mix your own concrete if you have the necessary supplies and equipment. You will need a shovel, a wheelbarrow, a hoe, a tamper, and a concrete mixer. If you struggle with the question of where to store your drill, so check the article about garage shelving to find your answer. 
Conclusion
Mixing concrete with a drill is comfortable l because it helps to evenly mix the ingredients. Without a good drill, the ingredients can become clumped together and difficult to work with. A good drill will also help to speed up the mixing process so that the concrete can be used sooner.
Overall, to mix concrete with a drill is a good idea because it will help ensure that the concrete is smooth and that it will not cause any problems when it is being used.
We hope that you have found this article useful for you. If you want to deepen your knowledge about essential working tools, we recommend you to read this article.
Also read:
