Warning: A non-numeric value encountered in /var/www/html/wp-content/plugins/gp-premium/elements/class-block-elements.php on line 785

How to Change Bits on Your Dewalt 20V Max Drill: A Step-by-Step Guide to Power Drilling

Photo of author
Written By John Gibbs




» Power Tools » Drill » Drill Bits » How to Change Bits on Your Dewalt 20V Max Drill: A Step-by-Step Guide to Power Drilling
Deprecated: Function wp_get_loading_attr_default is deprecated since version 6.3.0! Use wp_get_loading_optimization_attributes() instead. in /var/www/html/wp-includes/functions.php on line 6085

Do you want to learn how to quickly and easily change bits on your Dewalt 20V Max Drill? If so, you have come to the right place. This guide will walk you through the simple steps of changing the bit on your Dewalt 20V Max Drill. With just a few tools and a few steps, you can be drilling again in no time. So, if you have been wondering how to change bits on your Dewalt 20V Max Drill, read on to learn more.

Safety Precautions

Safety Precautions

  • Wear the right gear: Wear safety glasses and gloves when changing drill bits on your Dewalt 20V Max drill.
  • Unplug the drill: Always unplug the drill before changing drill bits.
  • Secure the part: Secure the drill bit holder before unscrewing the drill bit.
  • Check the size: Make sure that the drill bit you are using is the right size for your Dewalt 20V Max drill.
  • Protect your eyes: Make sure to wear safety glasses when using the drill.
  • Be aware of your surroundings: Make sure to work in a well-lit area away from flammable materials.
  • Keep your hands away from the drill: Make sure to keep your hands away from the drill bit when changing it.

Following these simple safety precautions when changing drill bits on your Dewalt 20V Max drill will help you to keep safe and make sure your drill bit change is successful. Always remember to unplug your drill before changing drill bits, wear the right gear and make sure to check the size of the drill bit before use.

Preparing to Change the Bit

Preparing To Change The Bit

Before changing the bit on your Dewalt 20V Max drill, it is important to prepare the tool properly.

Unplug the Drill, then remove the battery to ensure the drill won’t become accidentally activated.

Remove the Chuck by loosening the chuck collar clockwise until the chuck is released.

Unscrew the Bit from the chuck. If it is stuck, use a pair of pliers or wrench to loosen it.

Clean the Chuck with a soft cloth to remove any debris.

Check the Bit for any wear or damage. If the bit is damaged or worn, replace it.

Insert the New Bit into the chuck and tighten it by turning the chuck collar counterclockwise until it is secure.

Once the new bit is secured and the chuck is in place, you are ready to begin drilling.

Related Posts

Removing the Chuck

Removing The Chuck

Tools Required Instructions
Phillips head screwdriver
Vice grip
1. Unscrew the setscrew on the side of the chuck.
2. Place the drill in a vice grip, with the chuck facing up.
3. Tap the back of the chuck lightly with a hammer to loosen it.
4. Remove the chuck from the drill.

Installing the New Bit

Installing The New Bit

  • Remove the old bit – Press the spindle lock button on the side of the drill and hold it while you use the chuck key to loosen the chuck. Remove the old bit.
  • Insert the new bit – Insert the new bit and rotate it to ensure it has locked into the chuck securely.
  • Tighten the chuck – Use the chuck key to tighten the chuck.
  • Release the spindle lock – Release the spindle lock button.

Tightening the Chuck

Tightening The Chuck

To secure the bit into the drill, you must tighten the chuck. To do this, hold the drill firmly with one hand, and with your other hand, rotate the chuck clockwise until it is firmly tightened. Make sure that the bit is securely tightened, otherwise it could come loose while in use.

When the chuck is tight enough, it should not be able to be rotated by hand. If it feels loose, then tighten it further. If it is too tight, it may prevent the bit from being removed.

Finally, check the bit is secure by pulling it out and pushing it back in. If it does not come loose, then the bit is securely tightened.

Related Posts

Testing the Bit

Testing The Bit

  • Insert the bit into your Dewalt 20V Max Drill.
  • Securely tighten the chuck by turning clockwise.
  • Place a piece of scrap wood onto a flat surface.
  • Set the drill to low speed.
  • Gently press the trigger and test the bit against the wood.
  • If the bit is cutting cleanly, it is sharp and ready for use. If not, replace the bit.

Cleaning and Storing the Drill

Once you have changed the bit, it is important to remember to clean and store the drill properly. To clean the drill, use a soft, dry cloth. Make sure to wipe away all the dust and dirt from the surface of the drill. Once cleaned, make sure to store the drill in a cool, dry place away from direct sunlight. It is also important to keep the drill and its accessories in a safe place, away from children and pets.

To ensure a longer life for your drill, it is important not to leave it in a damp or wet environment, and to make sure that the battery is always stored in a cool place. It is also important to check the battery regularly for any signs of corrosion or damage. If the battery appears to be faulty, it is best to contact a professional for repair or replacement.

Frequently Asked Questions

What Tools are Needed to Change Bits on the Dewalt 20V Max Drill?

To change the bits on the Dewalt 20V Max Drill, you will need a Phillips screwdriver and a ¼-inch hex drive bit holder. You may also need a small flathead screwdriver for removing the screw securing the bit. Additionally, the bit you wish to install should be compatible with the ¼-inch hex drive bit holder.

Is there anything I should do before changing bits on the drill?

Before changing bits on the drill, it is important to make sure the power is off and the battery is detached. Additionally, wear safety glasses to protect your eyes from flying particles. Finally, use an appropriate size wrench to loosen the chuck and remove the bit.

What Type of Bit Should I Use for My Particular Project?

The type of bit you should use for your project depends on the material you’re drilling into and the size of the hole. For instance, a masonry bit is needed to drill into concrete and brick, while a spade bit is designed for wood. A step bit is ideal for drilling through thin metal, and a hole saw is needed for large holes in wood. Always use the correct bit for the material to ensure a clean, long-lasting hole.

Are there any safety precautions I should follow when changing bits?

Before changing bits, be sure to unplug the drill and wear safety glasses. Ensure that the bit is compatible with the type of drill you are using and that the bit is correctly sized for the material you are working with. Always support the material you are drilling into and make sure the drill bit is secure before drilling. Finally, hold the drill securely and firmly to avoid slipping or losing your grip during the process.

Can I use an adapter to change bits on the Dewalt 20V Max Drill?

Yes: You can use an adapter to change bits on the Dewalt 20V Max Drill. The adapter allows you to use different types of drill bits, including twist drill bits, hole saw bits, spade bits, and countersink bits.

  • It is easy to use and has a chuck that can easily accommodate different types of bits.
  • The adapter has a forward/reverse switch to help you quickly switch between drill and driver modes.
  • It also has a locking mechanism to ensure the bits stays securely in place during use.
  • The adapter is compatible with all Dewalt 20V Max tools and accessories.

With the help of an adapter, you can easily and quickly change bits on your Dewalt 20V Max Drill. It is a great tool for those who need to frequently switch between different types of drill bits.


Changing bits on a Dewalt 20V Max Drill is a simple process that requires only a few steps. With the right tools and a bit of practice, anyone can quickly and easily change drill bits on their Dewalt 20V Max Drill.



About John Gibbs

Hello everyone! My name is John Gibbs. I am 60 years old and have been in the family construction business all my adult life. Construction is not only my profession but also my passion. I know everything about building and repair materials, tools, advanced methods, techniques, and approaches. I will share the same knowledge with you in my articles.

Leave a Comment

Solve : *
26 ⁄ 13 =