<\/p>\n

To drill out a mailbox lock, you will need the following materials:<\/p>\n\n\n\n\n\n

Material<\/th>\n	Description<\/th>\n<\/tr>\n
Drill<\/td>\n	A cordless drill with a \u215c\u201d drill bit<\/a>.<\/td>\n<\/tr>\n
Screwdriver<\/td>\n	A flat head screwdriver to remove the screws on the lock.<\/td>\n<\/tr>\n
Safety Glasses<\/td>\n	To protect your eyes from flying debris.<\/td>\n<\/tr>\n<\/table>\n In addition to these materials, you may also need a few additional items depending on the type of lock on your mailbox. It is important to have all of the necessary materials before beginning<\/strong> the process to make sure you can successfully drill out the mailbox lock.<\/p>\n Step 2: Prepare the Lock<\/h2>\n <\/p>\n \n Check the Lock Type:<\/strong> Before drilling out a mailbox lock, it is important to identify the exact type of lock. Look closely at the lock to determine if it is a tubular or a disc tumbler lock.<\/li>\n Choose the Right Drill Bit:<\/strong> Tubular locks require a special drill bit, while disc tumbler locks can be drilled out with a standard drill bit. Be sure to choose a drill bit that matches the size of the lock, as this will make the drilling process easier.<\/li>\n Secure the Lock:<\/strong> Once you have the right drill bit, you need to secure the lock in place. Use a vise or clamp to hold the lock firmly in place. This will help to ensure that the drill does not slip when drilling.<\/li>\n Mark the Lock:<\/strong> Once the lock is secure, use a marker to mark the center of the lock. This will help to ensure that the drill bit is centered on the lock when drilling.<\/li>\n<\/ul>\n Step 3: Choose the Right Drill Bit<\/h2>\n <\/p>\n When it comes to drilling out a mailbox lock, it is essential that you select the right drill bit. The wrong drill bit will not only make the job more difficult, but it can also damage the lock and make it unusable. To ensure that you select the right drill bit for the job: <\/p>\n \n Check the type of lock<\/strong> \u2013 Different locks require different drill bits; therefore, you must check the type of lock first.<\/li>\n Choose a high-speed steel bit<\/strong> \u2013 High-speed steel bits are the best choice for drilling out locks as they are able to cut through hard metals quickly and efficiently.<\/li>\n Select the right size<\/strong> \u2013 Make sure that you select a drill bit that is the same size as the lock. If the bit is too large, it may damage the lock.<\/li>\n<\/ul>\n Once you\u2019ve selected the right drill bit, ensure that the bit is securely attached to the drill before you begin drilling.<\/p>\n Step 4: Drill through the Lock<\/h2>\n <\/p>\n \n Secure the lock in the vice.<\/li>\n Use a drill bit<\/strong> that is slightly larger than the size of the keyhole in the lock.<\/li>\n Drill through the center of the keyhole with light pressure, allowing the drill bit to do the work.<\/li>\n Once you have drilled through the lock, remove the lock from the vice and discard it.<\/li>\n<\/ul>\n Step 5: Replace the Lock<\/h2>\n