Are you wondering what drill bit is the equivalent of 516? If so, you’re in the right place! In this article, we’ll discuss the answer to this question and provide some tips for getting the most accurate results when using this drill bit size. So, if you’re looking for the answer to “what drill bit is equivalent to 516”, then read on!
Understanding Drill Bits and Decimal Equivalents
Drill Bit Sizes
Drill bits come in a variety of sizes and materials, including high-speed steel, cobalt, carbide and titanium. The size of a drill bit is described using a number, such as 5/16. This number is a fraction that refers to the bit’s diameter.
Decimal Equivalents
The decimal equivalent of a 5/16 drill bit is 0.3125. This means that a drill bit with a diameter of 0.3125 inches is the same size as a 5/16 drill bit. In other words, a 5/16 drill bit is the same size as a 0.3125 inch drill bit.
What Drill Bit Is the Equivalent of 516?
The drill bit equivalent of 516 is a 13/64-inch drill bit. This size drill bit is typically used for drilling holes in thin materials such as aluminum and plastic, as well as soft metals like copper and brass. It is also useful for making pilot holes in wood in preparation for larger screw sizes. 13/64-inch drill bits come in a variety of materials and styles, including high-speed steel, cobalt, titanium-coated, and brad-point.
Factors to Consider When Choosing the Right Drill Bit
Material of the Workpiece
Drill bits come in a variety of sizes, shapes, and materials. It is important to choose the right one for the material of the workpiece. For example, a drill bit made of high speed steel may be best for drilling into metals, while a carbide-tipped bit should be used for masonry or concrete.
Drill Bit Type
When it comes to a 5/16 inch drill bit, the most commonly used bit is a twist bit. These are designed to make a straight-sided hole and are available in a range of sizes and materials. Other options include spade bits, masonry bits, and auger bits. Each type of bit is designed for specific materials and tasks.
Finding the Right Drill Bit for 516 Decimal Equivalent
When it comes to drilling holes, having the right drill bit is essential. Knowing the decimal equivalent of the drill bit size you need is key. So, what drill bit is the equivalent of 516?
Drill Bits That Are Equivalent to 516
The decimal equivalent of 516 is 0.1875, which is the same as 3/16 inch. Therefore, a 3/16 inch drill bit is the equivalent of 516.
Tip: When buying drill bits, it is important to read the labels carefully. Some drill bits may be listed as fractions, while others may be listed as decimal equivalents.
Comparison of Different Drill Bits
The most common drill bit size is 5/16 inch. It is used for drilling through wood, plastic, and aluminum. But depending on the material and the job at hand, there are other drill bit sizes that may be more suitable.
Twist drill bits are the most commonly used drill bits and are available in various sizes, ranging from 1/16 inch to 1/2 inch. They are made from high-speed steel and have a spiral shape with two parallel cutting edges. These drill bits are suitable for drilling through wood, plastic, and metal.
Masonry drill bits are designed for use on hard materials like concrete, brick, and stone. They are usually made from carbide and have a tapered tip with a spiral flute. The tip is designed to cut through the material, while the flute allows for the removal of debris.
Spade drill bits are designed for use on softer materials like wood and plastic. They have a flat end and are available in various sizes. They are suitable for making large diameter holes and are often used in construction.
Screw extractor drill bits are used to remove screws that have become stuck in surfaces. They are made from high-speed steel and have a spiral flute. The tip is designed to grip onto the screw head and allow for easy removal.
Countersink drill bits are used to create a beveled edge on the surface of a material. They are available in various sizes and are made from high-speed steel. The tip is designed to cut into the material, while the flute allows for the removal of debris.
When choosing the right drill bit for the job, it is important to consider the material and the size of the hole that needs to be drilled. Different drill bit sizes are suitable for different materials and applications, so it is important to select the right one for the job.
Commonly Used Drill Bit Sizes and Equivalents
The drill bit size 5/16″ is equivalent to 8.0mm or 0.3125″. This size of drill bit is commonly used for a variety of drilling tasks, including drilling into wood, plastic, metal, and masonry. It is also used to make pilot holes in order to accommodate larger drill bits.
When working with different materials, it’s important to use the right type of drill bit. For example, a high-speed steel drill bit is ideal for drilling into metal, whereas a carbide-tipped drill bit is better suited for drilling into masonry or concrete.
The following table provides a list of commonly used drill bit sizes and their equivalents:
Drill Bit Size (in) Equivalent (mm)
1/16″ 1.5875mm
5/64″ 2.381mm
3/32″ 2.38mm
7/64″ 2.78mm
1/8″ 3.175mm
9/64″ 3.571mm
5/16″ 8.0mm
11/64″ 4.366mm
3/16″ 4.762mm
13/64″ 5.15mm
7/32″ 5.556mm
15/64″ 5.95mm
1/4″ 6.35mm
17/64″ 6.745mm
9/32″ 7.14mm
19/64″ 7.535mm
When drilling into masonry, it’s best to use a masonry bit that’s the same size as the drill bit you’re using. For example, if you’re using a 5/16″ drill bit, you should use a 5/16″ masonry bit.
It’s also important to choose the right drill bit for the job. For example, if you’re drilling into metal, you’ll need a cobalt or titanium drill bit. If you’re drilling into wood, a brad point or spade bit will do the job. And for drilling into plastic, you’ll need a plastic drill bit.
No matter what type of drilling job you’re tackling, it’s important to have the right drill bit on hand. Knowing the equivalent size of 5/16″ and other commonly used drill bit sizes can ensure that you have the right tool for the job.
Drill Bit Maintenance Tips
- Store your drill bits properly: Make sure to store your drill bits in a safe, dry place away from moisture, heat, dirt and dust.
- Prevent corrosion: To prevent corrosion, apply a thin layer of oil on your drill bits after every use. This will help to keep them in good condition.
- Clean your drill bits regularly: Clean your drill bits regularly with a wire brush or cloth to remove dirt and debris.
- Inspect your drill bits: Inspect your drill bits for any wear or damage before each use. Replace any worn or damaged drill bits.
- Sharpen your drill bits: To keep your drill bits sharp, use a sharpening stone or diamond file to sharpen them regularly.
- Keep your drill bits organized: Keep your drill bits organized in a toolbox or drawer to prevent them from getting lost or misplaced.
Frequently Asked Questions
What are the Benefits of Using a 516 Drill Bit?
- High Precision: A 5/16 drill bit is specifically designed for precision drilling, so it can be used for a wide range of applications, from woodworking to metalworking.
- Versatility: The 5/16 drill bit is compatible with many different materials, including wood, plastic, and metal, making it a versatile bit for any project.
- Durability: The 5/16 drill bit is made of high-grade steel, making it highly durable and able to withstand repeated use.
- Cost-effective: The 5/16 drill bit is an affordable tool that can be used for multiple projects without needing to be replaced.
What are the Different Types of Drill Bits Available for 516?
5/16 inch drill bits are the most commonly used size for a variety of applications. They are available in several different types, including cobalt, titanium, high-speed steel, and carbide. Cobalt and titanium drill bits are the strongest and most durable, while high-speed steel drill bits are the most economical. Carbide drill bits are the most versatile, and suitable for a wide range of materials.
How do I choose the correct drill bit for the job?
Choosing the correct drill bit for the job depends on the material to be drilled. Generally, it is important to use a drill bit that is made with materials that are harder than the material being drilled. For example, when drilling into wood, use a carbide-tipped drill bit, whereas a high-speed steel bit is suitable for drilling into metal or plastic. Additionally, the size of the drill bit also matters. The drill bit must be the same size as the diameter of the hole to be drilled. It is also advisable to use a drill bit with a sharp tip to reduce the time required to drill through the material.
What materials can be drilled with a 516 drill bit?
A 5/16″ drill bit is suitable for drilling various materials, including:
- Wood – 5/16″ drill bits are suitable for drilling into soft and hard woods.
- Metal – 5/16″ drill bits are suitable for drilling into soft metals, such as aluminum, brass, and copper.
- Plastic – 5/16″ drill bits are suitable for drilling into plastics, such as polypropylene and polyethylene.
- Masonry – 5/16″ drill bits are suitable for drilling into masonry materials, such as brick, concrete, and stone.
It is important to note that the type of material being drilled will affect the type of drill bit that is needed. For example, drilling into hardwoods requires a different type of drill bit than drilling into softwoods.
How do I Properly Care for and Store My 516 Drill Bit?
- Keep the drill bit clean: Clean the drill bit regularly with an appropriate cleaner and a soft cloth or brush. This will help remove dirt and debris, as well as any lubricants that may be present on the bit.
- Store in a dry environment: Store the drill bit in a dry, cool, and dark place to avoid corrosion and damage.
- Coat with lubricant: Coat the drill bit with a light lubricant (e.g., WD-40) to help protect it from rust and wear.
- Sharpen regularly: Sharpen the drill bit regularly to maintain its cutting edge.
- Inspect the bit: Inspect the drill bit regularly for signs of wear and tear and replace as needed.
Conclusion
5/16 inch drill bit is the equivalent of 5/16 inch drill bit. This size is commonly used for drilling holes for wood screws and other fasteners. Drill bits of this size can be found in most hardware stores and can also be ordered online.
