Crown molding is a decorative molding that is typically used to cover the joint between the wall and the ceiling. It is available in a variety of sizes and shapes, and can be made from a variety of materials, including wood, plastic, metal, and composites. Crown molding can be installed using a variety of methods, including nails, screws, or adhesives.
There are a number of different types of nailers available for installing crown molding. The most popular type of nailer is the pneumatic nailer, which uses compressed air to drive nails into the target surface. Other types of nailers include the manual nailer, the electric nailer, and the airless nailer.
Each type of nailer has its own set of pros and cons. Pneumatic nailers are the most popular type of nailer because they are the most powerful and can be used to drive nails into a variety of materials. However, they are also the most expensive. Electric nailers are the cheapest type of nailer, but they are not as powerful as pneumatic nailers and can only be used to drive nails into wood. Airless nailers are the most powerful type of nailer, but they are also the most expensive. They can be used to drive nails into a variety of materials, including wood, plastic, metal, and composites.
When choosing a nailer for crown molding, it is important to consider the type of material that will be used to install the molding. If the molding will be installed in a location where there is a lot of dust or debris, it is important to choose a nailer that is equipped with a dust bag or dust collection system. In this article, we will attempt to find the best finish nailer for crown molding.
Best 6 Nailers For Crown Molding
We would like to begin this list with our best nailer for crown molding: Ryobi P320 Airstrike 18 Volt One+.
- Ryobi P320 Airstrike 18 Volt One+
- BHTOP Cordless Staple Gun
- Arrow PT23G 23 Gauge Compact Pneumatic Pin Nail Gun
- WORKPRO 18-Gauge Pneumatic Brad Nailer
- NEU MASTER NTC0023 Rechargeable Nail Gun
- WEN 61721 18-Gauge 3/8-Inch to 2-Inch Pneumatic Brad Nailer
1. Ryobi P320 Airstrike 18 Volt One+
- Drives up to 1700 nails per charge
The Ryobi P320 Airstrike 18 Volt One+ is a cordless brad nailer that is designed to offer superior performance without the need for compressors, hoses, or pricey gas cartridges. This nailer is powered by a Ryobi 18-Volt battery, and it includes an adjustment dial that regulates air pressure for optimum results. It also has a low-nail indicator to quickly and easily see when it is time to reload. The Ryobi P320 Airstrike 18 Volt One+ is a great choice for anyone who is already in the Ryobi battery universe, as it is a no-brainer and it’s probably the best cordless nailer for crown molding and the best brad nailer for crown molding in this list.
- No compressor, hoses, or gas cartridges needed;
- Powered by a Ryobi 18-Volt battery;
- Adjustment dial regulates air pressure;
- Low-nail indicator.
- Only compatible with Ryobi batteries;
- Can be a bit heavy.
2. BHTOP Cordless Staple Gun
- ✅Convenient Operation: The stapler is practically maintenance-free. It’s easy access bottom-load magazine for quick and convenient reloading. There is magazine window making it easy to know the quality of the nails and the time to refill the magazine. With the LED level indicator, remind you of the power status.
If you’re in the market for a new staple gun, the BHTOP Cordless Staple Gun is a great option. This nailer is practically maintenance-free, with an easy access bottom-load magazine for quick and convenient reloading. The LED level indicator also helps you keep track of the power status.
Most importantly, the BHTOP Cordless Staple Gun is safe to use. The triple lock mechanism ensures that the gun can only fire when the safety switch is pressed. This prevents accidental injuries and damage.
The BHTOP Cordless Staple Gun is also high performance. It comes with a 4V electric staple and a 1.5 Ah lithium-ion battery. This provides a steady driving power and allows you to fire up to 1000 shots after a full charge.
The BHTOP Cordless Staple Gun is perfect for a variety of DIY projects. It’s made of high quality materials, so it’s extremely durable and long-lasting. Plus, the gun is lightweight and compact, making it easy to use.
So, if you’re looking for a new staple gun, the BHTOP Cordless Staple Gun is a great option. It’s safe, high performance, and perfect for a variety of DIY projects.
- Safe to use;
- High performance;
- Lightweight and compact;
- Durable and long-lasting.
- None.
3. Arrow PT23G 23 Gauge Compact Pneumatic Pin Nail Gun
- READY FOR ACTION: This power nailer is great for trim jobs, molding work, crafts, and hobby tasks that require headless pin nails
The Arrow PT23G 23 Gauge Compact Pneumatic Pin Nail Gun is a great tool for a variety of applications. It is especially well-suited for trim jobs, molding work, crafts, and hobby tasks that require headless pin nails.
The PT23G is easy to use, with a side-load magazine that makes loading nails and clearing any jams a breeze. It also comes with air inlet fittings and operates on home compressor units up to 100psi.
The PT23G is made of lightweight die-cast aluminum, which makes it durable and reduces strain during use. It also has a safety trigger feature that requires two triggers to be pulled before firing to prevent misfires.
The PT23G is a great choice for anyone looking for a compact, lightweight nailer that is easy to use and durable.
- Lightweight and compact;
- Easy to use;
- Durable;
- Two-trigger safety feature.
- May not be powerful enough for some applications.
4. WORKPRO 18-Gauge Pneumatic Brad Nailer
- Durable - This 18 GA straight brad nailer is designed with durable aluminum body and an ergonomically designed comfortable grip handle. Note: This is a Pneumatic Brad Nailer, which needs to connect Air Compressor by Air Hose. Working air pressure 75-100 PSI.
The WORKPRO 18-Gauge Pneumatic Brad Nailer is a great tool to have in your tool box. It’s durable, with an aluminum body, and has a comfortable grip handle. It’s also compatible with 3/8″ – 2″ length 18-Gauge brad nails, and has a depth adjustment switch for precise nail depth. It also has a quick jam release design to easily clear jammed nails. The 360 degree adjustable exhaust is a nice feature, and makes it easy to use. And, it can be used for a variety of applications, such as woodworking, pet house DIY, wood flooring, picture framing, door or window molding installation, and much more.
So, if you’re in need of a good brad nailer, the WORKPRO 18-Gauge Pneumatic Brad Nailer is a great option. It’s affordable, durable, and easy to use. And, it comes with a one-year warranty.
- Durable;
- Compatible with multiple nail sizes;
- Depth adjustment switch;
- Quick jam release;
- 360 degree adjustable exhaust.
- May not be ideal for heavy-duty projects.
5. NEU MASTER NTC0023 Rechargeable Nail Gun
- 🔰【Spiral-Drive Technology And Cordless Design】With its spiral-drive technology, nail gun battery powered deliver more full-power shots than comparable corded tool without the hassle of using cord, gas and compressor. More Convenience, Higer Effeciency.
The NEU MASTER NTC0023 rechargeable nail gun is a great option for those looking for a cordless design. With its spiral-drive technology, this nail gun can deliver more full-power shots than comparable corded tools. It is powered by a NEU MASTER 20v MAX rechargeable Lithium-Ion battery, which has passed 1000 charging cycle tests. This electric nailer can drive 1/4″ crown staples from 5/8″ to 1″ and 18 gauge brads from 5/8″ to 1-1/4″. It is equipped with a non-marring rubber nose, an oversized trigger, and an ergonomic handle to combat grip fatigue. It also has LED lights and a belt hook.
- Cordless design;
- Spiral-drive technology for more full-power shots;
- Non-marring rubber nose;
- Oversized trigger.
- None.
6. WEN 61721 18-Gauge 3/8-Inch to 2-Inch Pneumatic Brad Nailer
- Shoot 18-gauge brads ranging from 3/8 to 2 inches in length
If you’re looking for a pneumatic brad nailer on a budget, the WEN 61721 is a great option. This nailer can shoot 18-gauge brads ranging in length from 3/8 to 2 inches, and it operates at 60 to 115 PSI. It also comes with a depth adjustment wheel, a nail gauge, a rotatable exhaust, and a quick release 106-nail capacity magazine. The only downside is that it doesn’t come with any nails, so you’ll need to purchase them separately.
Overall, the WEN 61721 is a great option for anyone looking for an affordable pneumatic brad nailer. It’s easy to use and it comes with a variety of features that make it a great choice for a variety of projects.
- Affordable;
- Depth adjustment wheel;
- Nail gauge;
- Rotatable exhaust;
- Quick release 106-nail capacity magazine.
- No nails included.
16 or 18 gauge nailer for crown molding
Adding crown molding to your home is a simple way to add some elegance and style. But it can be a challenge to find the right nails to use. Here is a guide to the best nails for crown molding.
There are a few different types of nails that can be used for crown molding. The most common type of nail is the finish nail. Finish nails are small nails that are used to secure trim and other finishes to a surface. They have a small head that is designed to be hidden once the trim is in place.
Another type of nail that can be used for crown molding is the casing nail. Casing nails are larger than finish nails and have a thicker head. They are designed to be visible once the trim is in place. Casing nails are often used to attach trim around door and window frames.
The final type of nail that can be used for crown molding is the roofing nail. Roofing nails are large nails that are designed to be used on roofs. They have a large head and a sharp point. Roofing nails should not be used for crown molding.
When choosing nails for crown molding, it is important to choose the right type of nail for the job. Finish nails are the best choice for most applications, but casing nails can be used when the nails will be visible. Roofing nails should not be used for crown molding.
Backing Strip When Installing Crown Molding
Crown molding installation can be a challenging task, but with the help of a backing strip, it can be a lot easier. A backing strip is a thin piece of wood or metal that is attached to the wall behind the crown molding. It provides a surface for the nails or screws that hold the crown molding in place to grip onto. without a backing strip, the nails or screws would have nothing to grip onto and the crown molding would likely fall down.
When installing crown molding, it is important to use a backing strip in order to ensure a secure installation. If you are unsure of how to install crown molding, you can find videos or tutorials online that can show you how it is done. There are also many professional contractors who can install crown molding for you.
How to Choose Nail Gun for Crown Molding
There are a few factors that you need to take into account when choosing a nail gun for crown molding. The size and type of nose, the power source, the materials, the angles, and the loading speed are all important considerations.
Size and type of nose
The size and type of nose are important because they affect the size of the nails that the gun can use. The size and type of nose are determined by the shape of the gun’s nose. There are three types of noses: straight, clipped, and full. The straight nose is the most common type and is good for most applications. The clipped nose is good for tight spaces and the full nose is good for large pieces of wood.
Powering
The power source is important because it determines how powerful the gun is. There are three types of power sources: electric, pneumatic, and gas. Electric guns are the most common type and they are powered by a battery or a cord. Pneumatic guns are powered by compressed air and gas guns are powered by gas cylinders.
Materials
The materials are important because they determine what types of materials the gun can be used on. There are three types of materials: soft, hard, and composite. Soft materials are materials that can be easily penetrated by a nail, such as wood. Hard materials are materials that can’t be easily penetrated by a nail, such as metal. Composite materials are materials that are a combination of soft and hard materials.
Angles
The angles are important because they determine the angle at which the gun can be used. There are three types of angles: straight, miter, and bevel. The straight angle is good for most applications. The miter angle is good for mitering corners. The bevel angle is good for beveling edges.
Speed of loading
The loading speed is important because it affects how quickly the gun can be reloaded. The loading speed is determined by the speed at which the nails can be inserted into the gun.
Which nailer is best for installing crown molding?
When it comes to installing crown molding, there are a few different types of nailers that can be used: a finish nailer or a Brad nailer. Both have their own advantages and disadvantages, so it can be difficult to decide which one is right for the job. Here is a breakdown of the two types of nailers and when each one should be used:
Finish Nailer
A finish nailer is a type of pneumatic nailer that fires small, finishing nails.
These nails are thicker and have a smaller head than brad nails, so they are better suited for projects that require a lot of strength, like installing crown molding.
Finish nailers are more expensive than brad nailers, but they are also more powerful and can be used for a wider variety of projects.
Brad Nailer
A brad nailer is a type of pneumatic nailer that fires small, brad nails.
Brad nails are thinner and have a smaller head than finish nails, so they are better suited for projects that require a lot of accuracy, like installing trim or cabinet doors.
Brad nailers are less expensive than finish nailers, but they are also less powerful and can only be used for a limited number of projects.
So, which type of nailer should be used for installing crown molding? In most cases, a finish nailer is the better option. It is more powerful and can be used for a wider variety of projects. However, if accuracy is more important than power, then a brad nailer is a better choice.
FAQ for Nailers for Crown Molding
What type of nailers are available for crown molding?
There are several types of nailers available for crown molding. The most common are pneumatic nailers, which use compressed air to drive nails into the molding. Other types include manual nailers and battery-powered nailers.
What are the advantages of using a nailer for crown molding?
Nailers for crown molding offer several advantages over other methods of installing molding, such as nails or screws. They are more accurate and faster than other methods, and they produce less damage to the molding.
What type of nails should be used with a crown molding nailer?
The nails used with a crown molding nailer should be galvanized or stainless steel. They should also be the appropriate size for the nailer.
What are the safety precautions that should be followed when using a crown molding nailer?
When using a crown molding nailer, always wear safety goggles and a dust mask. Make sure the area around the workpiece is clear of debris and other objects before starting to nail. Do not over-tighten the nails, as this can cause damage to the molding. Finally, keep the nailer pointed in a safe direction at all times.
Conclusion
When it comes to choosing the best nailer for crown molding, there are a few factors to consider. The most important factor is the type of nailer. A pinner is best for small, delicate molding, while a brad nailer is best for bigger pieces.
The second most important factor is the power of the nailer. A high-powered nailer will drive the nails into the wood more easily, reducing the amount of force needed.
Finally, the size and weight of the nailer is also important. A heavier nailer will be more difficult to use for extended periods of time.
Also read:
