Discover the Right Size Drill Bit for Installing M6 Rivnuts with a Power Drill

Photo of author
Written By John Gibbs

 

 

 

» Power Tools » Drill » Drill Bits » Discover the Right Size Drill Bit for Installing M6 Rivnuts with a Power Drill

Are you looking for the answer to the question: “What size drill bit for an M6 rivnut?” If so, you’ve come to the right place! In this article, we’ll provide you with all the information you need to properly drill the right size hole for an M6 rivnut. We’ll also explain how you can use a drill bit size chart to determine the right size drill bit for your project. With this information, you’ll be able to get the job done quickly and easily. Keep reading to learn more!

What is a Rivnut/Nutsert?

What Is A Rivnut/Nutsert?

Rivnuts, also known as Nutserts, are internally threaded fasteners that are used for attaching components in hard-to-reach areas. Rivnuts are installed with a specialized tool, and once in place, they provide a strong, durable thread for attaching bolts, screws, or rivets. The most common materials used for Rivnuts are steel and aluminum.

Rivnuts have a flange on one side that prevents the fastener from pulling through the material. This makes them ideal for applications where there is limited access to the back side of the material. Rivnuts also provide a strong, vibration-resistant joint and are widely used in the automotive and aerospace industries.

The most common sizes of Rivnuts are M3, M4, M5, and M6. The size of the hole drilled in the material for the Rivnut will depend on the size of the Rivnut being used. For example, an M8 Rivnut will require a 8mm hole to be drilled in the material.

What is the Difference between an M6 Rivnut and 14-20 Nutsert?

What Is The Difference Between An M6 Rivnut And 14-20 Nutsert?

Both M6 Rivnuts and 14-20 Nutserts provide a secure, threaded insert to metal, plastic, and other materials. However, they differ in their installation and application.

M6 Rivnuts are used in a variety of industries including automotive and aerospace. They are installed by attaching to a flat surface, such as a panel, and then expanding the body of the rivet nut when inserted into the hole. This type of rivet nut is ideal for applications where access to the back side of the material is limited.

14-20 Nutserts are typically used in applications where access to the back side of the material is available. This type of rivet nut is installed by attaching to a threaded hole, such as a tapped hole, and expanding the body of the rivet nut when inserted into the hole.

M6 Rivnut 14-20 Nutsert
Ideal for applications where access to the back side of the material is limited Ideal for applications where access to the back side of the material is available
Installed by attaching to a flat surface Installed by attaching to a threaded hole
Expanding the body of the rivet nut when inserted into the hole Expanding the body of the rivet nut when inserted into the hole

When choosing a drill bit for an M6 Rivnut or 14-20 Nutsert, it is important to consider the diameter of the rivet nut and the material type. For example, when drilling through steel, a drill bit with a diameter slightly larger than the rivet nut should be used. For softer materials, such as aluminum, a drill bit with a diameter slightly smaller than the rivet nut should be used. Additionally, it is important to consider the length of the rivet nut when selecting a drill bit, as the bit must be long enough to accommodate the length of the rivet nut. The answer to the question, “What size drill bit for a 14 20 rivet nut?” depends upon the material and the length of the rivet nut.

Related Posts

What Size Drill Bit for an M6 Rivnut?

What Size Drill Bit For An M6 Rivnut?

  • M6 Rivnuts are a type of fastener that is used to provide a secure fit in a variety of applications. They are designed to provide a strong and reliable fastener, making them a popular choice for a variety of uses.
  • An M6 Rivnut requires a specific size drill bit in order to be properly installed. The standard drill bit size for an M6 Rivnut is an 8mm drill bit.
  • It is important to select the right size drill bit for an M6 Rivnut, as using the wrong size can cause instability or even damage the Rivnut.
  • The same drill bit size can also be used for other types of fasteners such as 14 20 nutserts.
  • When using an M6 Rivnut, it is important to ensure that the hole is drilled to the correct depth. This can be done by measuring the depth of the hole with a depth gauge or measuring tape.
  • It is important to note that the M6 Rivnut should be installed in a pre-drilled hole. Attempting to install the Rivnut without drilling a hole can cause the installation to be unstable and potentially cause damage.

In conclusion, the standard drill bit size for an M6 Rivnut is an 8mm drill bit. It is important to ensure that the hole is drilled to the correct depth and that the Rivnut is installed in a pre-drilled hole. The same drill bit size can also be used for other types of fasteners such as 14 20 nutserts.

What Size Hole to Drill for an M8 Rivnut?

What Size Hole To Drill For An M8 Rivnut?

When installing an M8 Rivnut, it is important to figure out what size drill bit to use. A Rivnut is a blind fastener that is inserted into a pre-drilled hole. The size of the drill bit is important to ensure that the Rivnut is secure and the hole is not too large.

The size of the drill bit needed for an M8 Rivnut is 10mm. The hole should be drilled with a drill bit that is slightly smaller than the outside diameter of the Rivnut. This will allow for a snug fit, which is necessary for a secure fastening.

When installing multiple Rivnuts, it is important to use the same size drill bit for each Rivnut. Using a drill bit that is too large or too small can cause the Rivnuts to be loose, which can be dangerous.

When installing 14 nutserts, the drill bit size should also be 10mm. The same drill bit size should be used for each nut, allowing for a secure fit.

It is important to remember that the size of drill bit should be slightly smaller than the outside diameter of the Rivnut to ensure a secure fit. The correct size drill bit for an M8 Rivnut is 10mm. When installing multiple Rivnuts, it is important to use the same size drill bit for each one to ensure the Rivnuts are secure.

What Size Drill Bit for a 14-20 Nutsert?

What Size Drill Bit For A 14-20 Nutsert?

When installing a 14-20 Nutsert, a special drill bit is required. The drill bit size depends on the type of Nutsert being used. For standard 14-20 Nutserts, typically an 8.3mm (5/16 inch) drill bit is used.

For Aluminum Nutserts, an 8.3mm drill bit works for a hole diameter of 8.2mm to 8.6mm. If you need to drill a larger hole, you may need to use a larger bit.

For Steel Nutserts, an 8.3mm drill bit works for a hole diameter of 8.2mm to 8.7mm. If you need to drill a larger hole, you may need to use a larger bit.

Drill Bit Sizes for Nutserts

Nutsert Material Drill Bit Size (mm)
14-20 Aluminum 8.3
14-20 Steel 8.3

When installing a Nutsert, it is important to use the correct drill bit size. If the hole is too small, the Nutsert may not be able to be secured properly. If the hole is too large, the Nutsert may not be able to be secured at all.

Related Posts

What Size Drill Bit for a 14 Nutsert?

What Size Drill Bit For A 14 Nutsert?

A 14 Nutsert requires a specific size drill bit for installation. The size of the drill bit depends on the size of the Nutsert and the material being used. Generally, a 13/64” drill bit is used for a 14 Nutsert in softer materials such as aluminum and plastic. For harder materials such as steel, a 5/32” drill bit should be used. It is important to use the correct size drill bit to ensure a properly installed Nutsert.

Drill Bit Size Considerations

  • Drill bit material: The material of the drill bit is important when drilling a hole for a rivet. The most common material used is cobalt steel. This material is heat treated to be harder than traditional steel, which makes it more capable of holding an edge and drilling through harder materials.
  • Drill bit size: The size of the drill bit is also important for drilling a hole for a rivet. The size of the drill bit used will depend on the size of the rivet being used. Generally, you want to use a drill bit that is slightly larger than the rivet being used.
  • Drill bit type: The type of drill bit you use is also important when drilling a hole for a rivet. The type of drill bit you use will also depend on the material being drilled. For softer materials, a standard twist drill bit is suitable. For harder materials, a high-speed steel drill bit is recommended.
  • Drill bit speed: The speed of the drill bit is also important when drilling a hole for a rivet. The speed of the drill bit should be adjusted according to the material being drilled. Generally, the speed should be increased when drilling harder materials.
  • Drill bit lubrication: The lubrication of the drill bit is also important when drilling a hole for a rivet. The lubrication should be adjusted according to the material being drilled. Generally, a lubricant should be applied to the drill bit when drilling harder materials.

Frequently Asked Questions

What is an M6 Rivnut?

An M6 Rivnut is a type of blind rivet nut which is inserted into a pre-drilled hole in a workpiece and secured permanently in place. It is an ideal fastener for applications where access to the rear of the workpiece is limited, such as in sheet metal or other thin materials. The Rivnut has a threaded body which can be used to attach components such as screws and nuts.

Can I use a drill bit of a different size than M6 for an M6 Rivnut?

No, it is not recommended to use a drill bit of a different size than M6 for an M6 Rivnut. M6 Rivnuts are designed to be used with an M6 drill bit, and using any other size may create an improper fit and cause the Rivnut to be ineffective.

Is it necessary to use a drill bit specifically designed for an M6 Rivnut?

Yes, it is necessary to use a drill bit specifically designed for an M6 Rivnut. This type of drill bit has a specially-shaped flute that is designed to create threads that match the size of the Rivnut. Additionally, these drill bits are made to cut through the material with minimal effort, ensuring that the Rivnut is properly secured in place.

What is the best material to use for an M6 Rivnut?

Aluminium is often recognized as the best material for an M6 Rivnut due to its lightweight yet strong qualities. It is also resistant to corrosion and easy to work with.

Stainless steel is another great option for an M6 Rivnut. It is more durable than aluminium and can handle a higher load capacity, making it suitable for use in structural applications. It is also more resistant to corrosion and heat than aluminium.

Brass is a good choice for an M6 Rivnut if you are looking for a material that is easy to work with and can handle higher temperatures. It also has a low electrical conductivity, making it suitable for use with electrical components.

  • Aluminium
  • Stainless steel
  • Brass

When choosing the best material for an M6 Rivnut, consider its application and the load capacity it needs to handle. Each material has its own advantages and disadvantages, so it is important to choose the best one for your project.

Are there any safety precautions I need to take when using an M6 Rivnut?

  • Wear protective eyewear and clothing: Eye protection is essential when working with any type of power tool, as well as when working with any type of metal that could cause sparks or particles to fly. Additionally, it is important to wear protective clothing like gloves and long sleeves to protect your skin from any flying debris.
  • Secure the workpiece: It is important to secure the workpiece in a vise or other secure mechanism before beginning any drilling or installation process. This will ensure that the workpiece does not move during the installation, which could lead to injury or damage.
  • Use the correct drill bit size: It is essential to use the correct drill bit size for the M6 Rivnut in order to ensure a secure, tight fit and to prevent injury or damage.
  • Follow the manufacturer’s instructions: Make sure to read and follow all of the manufacturer’s instructions for installation and use of the M6 Rivnut. Not following the manufacturer’s instructions could lead to injury or damage.

Conclusion

The optimal drill bit size for an M6 rivnut is 4.2 mm. A slightly larger bit may be used, but drilling too large a hole can damage the rivnut and cause it to not fit properly. Following these guidelines will ensure a secure and successful installation of the M6 rivnut.

References

 

About John Gibbs

Hello everyone! My name is John Gibbs. I am 60 years old and have been in the family construction business all my adult life. Construction is not only my profession but also my passion. I know everything about building and repair materials, tools, advanced methods, techniques, and approaches. I will share the same knowledge with you in my articles.

Leave a Comment

Solve : *
22 ⁄ 11 =